Factory Outlets Coupling For Pump And Motor - FCL type flexible sleeve column pin coupling – Qiongyue
Factory Outlets Coupling For Pump And Motor - FCL type flexible sleeve column pin coupling – Qiongyue Detail:
Product Description
The FCL elastic sleeve pin coupling has a simple structure, is easy to make, does not need lubricating oil, does not need to be bonded with metal vulcanization, and is convenient to change the elastic sleeve, does not need to move the half coupling, and has the performance of repaying the relative deviation of the two shafts and reducing vibration and mitigating conflicts. The elastic sleeve office is a compression deformation. Because the elastic sleeve is thin, small in size and limited in elastic deformation, the elastic sleeve pin coupling can repay the axial displacement and elasticity, but the allowable compensation amount for axial displacement is small and the elasticity is weak.
FCL type elastic sleeve pin coupling is based on the locking force of the pin group and sprouts on the friction torque of the contact surface, and compresses the rubber elastic sleeve to transmit the torque. It is suitable for medium and small power shafting transmission with good rigidity of mounting base, relatively high alignment, half large impact load and low requirements for vibration reduction.
The reasons for less allowable compensation amount of axial displacement of FCL elastic sleeve pin coupling are as follows:
1. FCL type elastic sleeve pin coupling relies on the locking force of the pin group to generate friction torque on the contact surface, and compresses the rubber elastic sleeve to transmit torque. It is suitable for medium and small power shafting transmission with good rigidity of mounting base, high alignment accuracy, low impact load and low requirements for vibration reduction.
2. The elastic sleeve is subject to compression deformation. Due to the thin thickness, small volume and limited elastic deformation of the elastic sleeve, the elastic sleeve pin coupling can compensate the axial displacement and elasticity, but the allowable compensation amount for axial displacement is small and the elasticity is weak.
3. FCL elastic sleeve pin coupling has simple structure, easy manufacturing, no lubrication, no need to bond with metal vulcanization, convenient replacement of elastic sleeve, no need to move the half coupling, and has the performance of compensating the relative offset of two shafts and damping and buffering.
Specification
| Type | Max torque N.m |
Max speed r/min |
D | D 1 | d 1 | L | C | n-M | kg |
| FCL90 | 4 | 4000 | 90 | 35.5 | 11 | 28 | 3 | 4-M8×50 | 1.7 |
| FCL100 | 10 | 4000 | 100 | 40 | 11 | 35.5 | 3 | 4-M10×56 | 2.3 |
| FCL112 | 16 | 4000 | 112 | 45 | 13 | 40 | 3 | 4-M10×56 | 2.8 |
| FCL125 | 25 | 4000 | 125 | 50 | 13 | 45 | 3 | 4-M12×64 | 4.0 |
| FCL140 | 50 | 4000 | 140 | 63 | 13 | 50 | 3 | 6-M12×64 | 5.4 |
| FCL160 | 110 | 4000 | 160 | 80 | 15 | 56 | 3 | 8-M12×64 | 8.0 |
| FCL180 | 157 | 3500 | 180 | 90 | 15 | 63 | 3 | 8-M12×64 | 10.5 |
| FCL200 | 245 | 3200 | 200 | 100 | 21 | 71 | 4 | 8-M20×85 | 16.2 |
| FCL224 | 392 | 2850 | 224 | 112 | 21 | 80 | 4 | 8-M20×85 | 21.3 |
| FCL220 | 618 | 2550 | 250 | 125 | 25 | 90 | 4 | 8-M24×110 | 31.6 |
| FCL280 | 980 | 2300 | 280 | 140 | 34 | 100 | 4 | 8-M24×116 | 44.0 |
| FCL315 | 1568 | 2050 | 315 | 160 | 41 | 112 | 4 | 10-M24×116 | 57.7 |
| FCL355 | 2450 | 1800 | 355 | 180 | 60 | 125 | 5 | 8-M30×50 | 89.5 |
| FCL400 | 3920 | 1600 | 400 | 200 | 60 | 125 | 5 | 10-M30×150 | 113 |
| FCL450 | 6174 | 1400 | 450 | 224 | 65 | 140 | 5 | 12-M30×150 | 145 |
| FCL560 | 9800 | 1150 | 560 | 250 | 85 | 160 | 5 | 14-M30×150 | 229 |
| FCL630 | 15680 | 1000 | 630 | 280 | 95 | 180 | 5 | 18-M30×150 | 296 |
detail picture
package
Product detail pictures:
Related Product Guide:
The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for Factory Outlets Coupling For Pump And Motor - FCL type flexible sleeve column pin coupling – Qiongyue, The product will supply to all over the world, such as: Albania, Czech republic, Jeddah, We are trying our best to make more customers happy and satisfied. we sincerely hope to establish a good long-term business relationship with your esteemed company thought this opportunity,based on equal, mutual beneficial and win win business from now till the future.
By Maud from Gabon - 2018.08.12 12:27
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Maggie from Puerto Rico - 2018.05.13 17:00
